FabulaTech Forum - COM port Serial Redirect

Oct 25^th, 2026, 7:04am

Welcome, Guest. Please Login or Register.

FabulaTech Forum Serial Port Solutions Serial Port Redirector (Moderators: Sergey_Jarovski, Andrew, Tim_GaliullinFT) COM port Serial Redirect

Previous topic | Next topic

Pages: 1

Notify of replies

Author

Topic: COM port Serial Redirect (Read 8750 times)

ltaquet
FabulaTech Forum Newbie

Posts: 1

COM port Serial Redirect
on: May 4^th, 2021, 5:35pm

Quote

Modify

Hello,

I am using the Serial Port Redirector to redirect a Server Virtual Port into a COM to communicate with a device. It appears that I have to delete and re-add the port every time I start the device for it to connect. Is there a way to avoid this?

I have also noticed that at times my command prompt says a connection has been established over the port that the Serial Port Redirector is listening, but the GUI does not register the connection and it does not appear to be redirected to the COM.

To reiterate, I am able to successfully redirect most of the time, but long term I am using the redirector for a project that requires I be troubleshooting for as little time as possible.

Last Edit: May 4^th, 2021, 5:44pm by ltaquet

IP Logged

Sergey_Jarovski
FabulaTech Forum Moderator
FabulaTech Forum God

Gender:

Posts: 559

Re: COM port Serial Redirect
Reply #1 on: May 5^th, 2021, 8:16am

Quote

Modify

Hi,

1) What version of SPR do you use?
2) Send your shareit reference number or license key to support@fabulatech.com
3) What do you mean by "to redirect a Server Virtual Port into a COM to communicate with a device"?
With help of SPR you can redirect a physical server port (https://www.fabulatech.com/serial-port-redirector-help/creating-physical-server-port.html) or Fabulatech virtual server port (https://www.fabulatech.com/serial-port-redirector-help/creating-server-port.html) to the remote side.
The only available port for creation on the remote side (another instance of SPR) is FabulaTech client virtual port (https://www.fabulatech.com/serial-port-redirector-help/creating-serial-port.html).
4) "but the GUI does not register the connection". Just close and open SPR GUI again.
3) Regarding "I start the device for it to connect". It looks like you are using a serial device server (not SPR) on the remote side. Look at this help manual ("Connection Settings" section) for help:
https://www.fabulatech.com/serial-port-redirector-help/configuring-server-port.html

IP Logged

Sergey Jarovski

FabulaTech
===================
http://www.fabulatech.com

Pages: 1

Notify of replies


Previous topic \| Next topic