FabulaTech Forum - A little help

Apr 19^th, 2024, 10:21am

Welcome, Guest. Please Login or Register.

FabulaTech Forum
Serial Port Solutions
Serial Port Splitter (Moderators: Andrew, Tim_GaliullinFT, Sergey_Jarovski)
A little help

« Previous topic | Next topic »

Pages: 1

Notify of replies

Author

Topic: A little help (Read 4050 times)

ggarrison
FabulaTech Forum Newbie

Posts: 1

A little help
« on: Sep 12^th, 2006, 7:36am »

Quote

Modify

After evaluating several products I seem to think yours runs the best in my hardware configuration. However, all of the products I have looked at seem to have the same problem.

I want to join to com ports together. One port has NEMA data from a GPS. The other port has NEMA data from a compass.

Problem:
Compass data looks good but GPS data has some extra CR and some of the data looks corrupted. Both ports run at 4800 baud but the Compass comes at a faster frequency then the GPS.

Any think I can do that will improve the data?

IP Logged

Andrew
FabulaTech Forum Moderator
Moderator
FabulaTech Forum Senior Member

Gender:

Posts: 427

Re: A little help
« Reply #1 on: Sep 14^th, 2006, 7:38am »

Quote

Modify

You get this problem because Joining feature of Serial Port Splitter was developed mostly for the case when one application send (write) serial data to several physical COM ports. In your case one application tries to read serial data from two COM ports at the same time but this application, apparently, can not recognize correct data within mixed data received from the both ports.

Please email this problem in our Support Service and we will discuss possibility to customize our Joining feature especially for your case.

IP Logged

Andrew Scott

FabulaTech
===================
http://www.fabulatech.com

Pages: 1

Notify of replies


« Previous topic \| Next topic »