FabulaTech Forum - connect to PLC and have bluescreen

Oct 12^th, 2026, 4:16am

Welcome, Guest. Please Login or Register.

FabulaTech Forum USB Solutions USB over Network (Moderators: Andrew, Tim_GaliullinFT, Sergey_Jarovski) connect to PLC and have bluescreen

Previous topic | Next topic

Pages: 1

Notify of replies

Author

Topic: connect to PLC and have bluescreen (Read 9252 times)

woovoow
FabulaTech Forum Newbie

Posts: 1

connect to PLC and have bluescreen
on: May 5^th, 2011, 10:43pm

Quote

Modify

hello
I use USB over Network V4.5.3 to share USB
the soft Server installed on my real PC and OS is xp-32bit
client installed on VMware and OS is also xp-32bit

my usb device is Omron's PLC
I can connect PLC on my real PC with Omron's Soft
but when I connect on VMware from share usb,the VMware PC have a bluesreen

How can I do?

Q:I can use HDD with the soft

Last Edit: May 5^th, 2011, 10:49pm by woovoow

IP Logged

Harry_Mitkov
FabulaTech Forum Full Member

Gender:

Posts: 136

Re: connect to PLC and have bluescreen
Reply #1 on: May 10^th, 2011, 3:12am

Quote

Modify

Dear woovoow,

Unfortunately VMware has its own tools for redirecting USB devices to the guest systems. These tools are not compatible with FabulaTech software. The conflint of WMware drivers and FabulaTech drivers cause BSOD.

To avoid this we suggest you to disable WMWare USB redirection driver.
To do it you have to do the following.
1) Start regedit (Start-> Run-> regedit)
2) Go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\hcmon

3) Find there "Start" parameter
4) Change its value to "4"

5) Reboot the PC

IP Logged

Pages: 1

Notify of replies


Previous topic \| Next topic