No more Blade Server Headaches! Blade Computers can now share any USB device!
Challenge
Using Blade Servers can considerably save money on hardware but here some problems arise. One of them is that it is completely impossible to work with USB devices. Blade computers can share networking, storage, power, cooling but not the USB. Blade Server manufacturers did not provide any solution to share USB devices between blade computers.
Solution
To resolve this challenge, FabulaTech has developed a unique end-to-end USB over Network solution for Blade Servers. Now you can work with any remote USB device as if it were directly connected to your blade computer. Implemented simplicity make sure enormous program's efficiency and streamlined fast operation speed. This functionality can be easily integrated into your solution.
If you access remote blade server via RDP or Citrix ICA, pleas refer to "USB for Remote Desktop".
In Action
The program consists of a Server and a Client. You should install the USB over Network Server on local computer to which the USB device is physically connected. USB over Network Client side should be installed on the remote blade computer from which you need to access your devices. No special knowledge needed, the program installs easily right out of the box.
Quick Instruction
- Download USB over Network.
- Install USB over Network Server on the local computer to which USB devices are connected.
- Install USB over Network Client on the remote blade computer, from which access to local USB devices is needed.
USB over Network Server
32 and 64-bit: Windows Vista, 7, 8, 8.1, 10, Server 2008, 2008 R2, 2012, 2012 R2, 2016, 2019
Linux kernel 2.6.32 or greater, libssl 1.0 or greater
macOS Monterey, macOS Ventura.
USB over Network Client
32 and 64-bit: Windows Vista, 7, 8, 8.1, 10, Server 2008, 2008 R2, 2012, 2012 R2, 2016, 2019
Linux kernel 2.6.32 or greater, libssl 1.0 or greater
USB over Network Home Page Download