Oct 29th, 2025, 9:04pm
Home Home  Search Search  Members Members  Login Login  Register Register
Welcome, Guest. Please Login or Register.
FabulaTech Forum Serial Port Solutions Virtual Serial Port Kit (Moderators: Tim_GaliullinFT, Andrew, Sergey_Jarovski) how do i make a virtual serial port Previous topic | Next topic
Pages: 1  Reply Reply  Notify of replies Notify of replies  Print Print
   Author  Topic: how do i make a virtual serial port  (Read 7483 times)
mrcoolboy15
FabulaTech Forum Newbie
*

View Profile         
Posts: 2
how do i make a virtual serial port
on: Sep 20th, 2006, 11:26am 		Quote Quote  Modify Modify
I have a three computers on a network, and they all share the same printer. The problem is when i remote desktop into a remote computer we have some where else, it will not show the printers on our network, therefore not allowing me to print from the remote computer. And i have allowed printer sharing in the remote desktop settings.
 
any suggestions?
IP Logged
mrcoolboy15
FabulaTech Forum Newbie
*

View Profile         
Posts: 2
Re: how do i make a virtual serial port
Reply #1 on: Sep 20th, 2006, 11:27am 		Quote Quote  Modify Modify
will a virtual serial post make this possible?
IP Logged
Andrew
FabulaTech Forum Moderator
Moderator
FabulaTech Forum Senior Member
*****

View Profile   WWW         
Gender: male Posts: 427
Re: how do i make a virtual serial port
Reply #2 on: Jan 15th, 2007, 4:28am 		Quote Quote  Modify Modify
Hi,
As I understand your printer is serial device. Right?
If so, you can share it over network on PC to which the printer is physically plugged (Network Serial Port Kit should be used fro that). Then you can connect shared port as virtual COM port on Terminal Server.
That's all.
IP Logged
Andrew Scott

FabulaTech
===================
http://www.fabulatech.com
Pages: 1  Reply Reply  Notify of replies Notify of replies  Print Print

Previous topic | Next topic