FabulaTech Forum
        (http://www.fabulatech.com/forum)
      

        Serial Port Solution >> Virtual Serial Port Kit >> PocketPC emulation
        
(Message started by: Archie on Nov 25th, 2004, 3:07pm)
Title: PocketPC emulation
Post by Archie on Nov 25th, 2004, 3:07pm
ActiveSync doesn't recognise PocketPC emulator connected through a virtual serial port pair. Has it been fixed in 4.6? Or is it some kind of technical limitation?
Title: Re: PocketPC emulation
Post by Andrew on Nov 26th, 2004, 5:20am
We are trying to examine this problem now and will inform you results later...

Thank you for feedback.
Title: Re: PocketPC emulation
Post by Andrew on Mar 14th, 2005, 8:45am
ActiveSync with Pocket PC problem has been fixed in the new Virtual Serial Port Kit version. Moreover new 4.7 version allows to create different null modems with loop back, partial or full handshaking now.

You can download latest program versions here:
http://www.fabulatech.com/downloads.html
Title: Re: PocketPC emulation
Post by Archie on Mar 14th, 2005, 3:40pm
:D

This is better than what I've expected....

Thank you so much...

:D
Title: Re: PocketPC emulation
Post by kanagom79 on Dec 19th, 2005, 1:06am

on 03/14/05 at 08:45:04, Andrew wrote:
ActiveSync with Pocket PC problem has been fixed in the new Virtual Serial Port Kit version. Moreover new 4.7 version allows to create different null modems with loop back, partial or full handshaking now.

You can download latest program versions here:
http://www.fabulatech.com/downloads.html



I have still problem to connect activesync 3.8 with Pocket PC 2003 emulator by embedded Visual c++. I used instructions from your article, but it was uncuccessful.
I think that settings in visual c++ was rigth because during test activesync start to connect with emulator but after few second connection shut down with error.

Please help me.
Title: Re: PocketPC emulation
Post by Andrew on Dec 20th, 2005, 8:21am
But what error message exactly do you get?
Title: Re: PocketPC emulation
Post by kanagom79 on Dec 21st, 2005, 12:29am
when connecting to pocket pc emulator, activesync shows error: cannot connect to emulator because Device in not connected.
Title: Re: PocketPC emulation
Post by Emama on Apr 28th, 2006, 1:47am
when connecting to pocket pc emulator 2003, activesync 3.8/3.1/3.0 via a null modem cable I get  error: DEVICE NOT RECOGNIZED.

The connectivity couldnot be established and the partnership dialog does not pop up.

However when I try the same thing with "Virtual Serial Port Kit v4.8" connectivity is established, also the partnership dialog pop up.

There is no problem with serial cable. I have tested communication at the 2 com ports using the same cable. Data entered at one port (using hyperterminal) is displayed at the other end.

 I cannot make out why I am facing problem when I use serial cable. Is this the problem with serial cable or any of the settings are required?

Please help me if u can..

Thanking u,
Emama
Title: Re: PocketPC emulation
Post by Andrew on Apr 28th, 2006, 4:17am
Yes, it's problem with your serial cable. Probably you have to use null modem cable with full handshaking pinout scheme.

Please refer to this description of different pinout schemes:
http://www.virtual-serial-port.com/virtual-serial-port-kit-help/using-different-null-modems.html